iPhone repair.
Down to the
last trace.
Don't settle for module swaps that break Face ID or strip True Tone. Our lab executes micro-BGA reballing, logic board trace reconstruction, and fiber-laser chassis work — matching factory hardware tolerances.
Three bench disciplines.
Every failure mode covered.
High-frequency induction handpieces pull and replace shorted PMICs, baseband chips, and Wi-Fi modules. VDD_MAIN and VDD_BOOST rail isolation with DCPS current mapping.
Fiber-optic laser scripting decomposes the adhesive boundary without touching MagSafe coil routing or antenna flex paths. Zero mechanical pressure on the frame.
EEPROM programmer transfers display config tables to replacement panels — preserving native touch sampling, TrueTone depth profiles, and Dot Projector compliance.
Ultrasonic bath cleaning, targeted flux decontamination, and corrosion treatment under the BGA cluster — followed by full power-on validation against factory current specs.
Dual-Layer Board Splitting
Modern iPhones (XS through 16 Pro) use a sandwiched double-decker logic board. When severe drops fracture the internal interposer connections between layers, most shops refuse the job. We split the upper and lower boards at precise thermal increments, clear the BGA grid, and manually reball every pad before rejoining — no full board swap needed.
Micro-Trace Re-Routing
The Audio IC fault (no sound, grayed-out speaker) and Touch Disease (grey flickering bar, unresponsive touch) are caused by broken micro-traces under the control IC — not the component itself. We lift the chip, reconstruct the trace under 45× optics with 0.1mm wire jumpers, and reball back to spec. Fix rate: over 90% on first attempt.
Common iPhone failures
we resolve at component level.
How your iPhone moves through the lab.
Every repair follows the same structured workflow. You receive a written diagnostic report and fixed-price quote before any component is touched. No surprise charges.
Full cosmetic photography and serial number record before anything is opened.
DCPS current draw analysis, power-on testing, and visual board inspection under stereo optics. Written fault report produced.
Component breakdown shared with you. Repair begins only after your written approval.
Executed with temperature-controlled JBC irons, hot-air rework stations, and calibrated no-clean flux.
Every function tested against factory specification. Repair carries a 90-day warranty on the specific fault addressed.
Book your iPhone diagnostic — it's free.
We'll assess the fault, give you a written report, and quote a fixed price before touching anything.
Initialize Bench Request →